Demo road bike Marin Stelvio PRO Red 56 cm For Sale

SOLD
The Stelvio T3 Pro RED is a no-compromise road bike built for racing and elite riding. Built upon Marin’s ultra-light Tube-to-Tube UD carbon frameset with full carbon fork, the Stelvio T3 Pro has a host of go-fast features including a tapered headtube and Press Fit 30 bottom bracket for direct response to all-out pedaling efforts. Unique Power Taper seat tube and RVS seat stays added compliance to enhance rider comfort, while our new 4-in-1 cable guide system allows for aero cable routing with easy access ports for both electric and mechanical drivetrains. SRAM’s flagship RED 22 group is featured along with Reynolds aero-profile, carbon clincher Assault wheels. Ritchey WCS Carbon components adorn the cockpit coupled with a Prologo Scratch Pro saddle.
This bike has a few miles and a lot of features. This is a bike that will make you faster $2500.00
marin stelvio at 15lb
15 pound bike! Marin Stelvio
for sale
Carbon frame, fork, crank, and wheels.
DSCF3372
Sram Red & Reynolds carbon wheels

DSCF3373 DSCF3375 DSCF3376

Carbon frames are generally manufactured as a “monocoque” structure. This means the entire frame, or significant parts anyway (front triangle, or rear triangle) are molded as a single piece. The bladders that are used to pressurize the frame during molding are difficult to control and may result in additional resin left inside the frame. While this can ensure good continuity of the carbon fibers through that part of the mold, all monocoque frames still require that frame parts be glued together. Marin employs this manufacturing technique where it makes sense, but in the road category, we primarily use T3 construction, also know as “tube to tube”. In this technology, each frame tube is individually molded, which allows us to precisely control the wall thickness of each tube, resulting in ride tuning perfection. Then, each tube is laid into a fixture that positions them to precisely the angles required for that frame, where they are then bonded into place, and reinforced with an additional lay up of carbon, before going into the heating ovens. This extra care results in absolute minimum weight, perfected ride feel, and a bike that you won’t want to climb off of.

Encore Octave 20″ BMX Bike

For the rider just getting into the sport who is looking to make a smaller upfront investment, the Octave makes the true BMX feel attainable with features like a top load stem, 25-9 gearing and added clearance on the frame, fork and brake for wider tires. The fully sealed rear cassette and 3 piece cranks add durability to the bike and the 20-inch top tube, 8.0-inch bars and 170mm cranks, give it a nice compact feel. The unsealed headset, American bottom bracket and value components mean this bike will need more care, regular maintenance and investment in replacement parts to keep it running smoothly. NEW FOR 2016: Wider and stronger pull U-brake for 2.4 tire clearance, VELO 3mm padded vinyl cover seat.

 

 

bmx bike
Encore Octave 20″ in black with red trim.

Check out the video below.

Top Tube Length: 20″
Frame: Hi-tensile steel frame, HT(°): 74.5, CS (“): 13.25, SO (“): 8, BB (“): 11.5, ST (°): 71
Seat Clamp: Alloy
Fork: Hi-tensile steel, 2 piece
Handlebar: H: 8.0″, W: 28″, hi-tensile steel
Stem: Alloy top load – 50mm
Grips: Mushroom 147mm
Headset: Standard unsealed 1-1/8″
Brake: Wider pull U-Brake for 2.4 tire width
Brake Lever: Alloy for U-Brake
Gearing: 25/9
Cranks: Chromoly 3 piece, forged 170mm
Bottom Bracket: Am BB 19mm
Sprocket: Steel, 25T
Pedals: Wellgo plastic 9/16″, chromoly spindle
Chain: 410H
Front Hub: 3/8″ unsealed, 17mm axle nuts
Front Rim: Alloy single wall 36H
Front Tire: Forza 20 x 2.125
Rear Hub: 3/8”, fully sealed cassette with 9T, 1 piece driver, 17mm axle nuts
Rear Rim: Alloy single wall 36H
Rear Tire: Forza 20 x 2.125
Seat: VELO 3mm padded leather cover
Seat Post: Integrated with seat

Encore AMP 20″ BMX Bike

Built for getting into BMX, the Amp20 features a true BMX feel with a 20.25-inch top tube and bigger 8.25-inch handlebars perched on a top load stem. 25/9 gearing, 3 piece cranks and added clearance on the frame, fork and brake for wider aftermarket tires means this bike has all the basics as well as the newest features in BMX. Keep down time to a minimum with low maintenance components like fully sealed rear cassette and sealed Mid bottom bracket. NEW FOR 2016: Wider and stronger pull U-brake for 2.4 tire clearance, VELO 3mm padded Vinyl cover seat.

 

 

bmx park
Encore AMP 20″ in black with teal trim.

Check out the video below.

Top Tube Length: 20.25″
Frame: Hi-tensile steel frame, HT(°): 74.5, CS (“): 13.25, SO (“): 8, BB (“): 11.5, ST (°): 71
Seat Clamp: Alloy
Fork: Hi-tensile steel, 2 piece
Handlebar: H: 8.25″, W: 28″, hi-tensile steel
Stem: Alloy top load – 50mm
Grips: Mushroom 147mm
Headset: Standard unsealed 1-1/8″
Brake: Wider pull U-Brake for 2.4 tire width
Brake Lever: Alloy for U-Brake
Gearing: 25/9
Cranks: Chromoly 3 piece, forged 170mm
Bottom Bracket: Sealed Mid BB 19mm
Sprocket: Steel, 25T
Pedals: Wellgo plastic 9/16″, chromoly spindle
Chain: 410H
Front Hub: 3/8” unsealed, 17mm axle nuts
Front Rim: Alloy single wall 36H
Front Tire: Innova 20 x 2.25
Rear Hub: 14mm, fully sealed cassette with 9T, 1 piece driver, 17mm axle nuts
Rear Rim: Alloy single wall 36H
Rear Tire: Innova 20 x 2.25
Seat: VELO 3mm padded leather cover
Seat Post: Integrated with seat

Evo Balance bike for new riders Run Bike

Great way for young ones to learn balance and steering and to have fun while doing it. Balance bikes are built without pedals, cranks, sprockets and chain to allow the child to propel themselves along using their feet to go and to stop.

The Beep-Beep balance bike is built with 12″ lightweight alloy rims and air filled tires for proper cushion and traction. Nice rubber grips with flanges on the ends to help hands from slipping off.

Minimum seat height is 13.5″ or 34mm and the max height is 16″ or 40.5mm.

run bike
Red
strider bike
Green